"http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 1 of 5 PETITIONER: PEFCO FOUNDRY CHEMICALS LTD. Vs. RESPONDENT: COLLECTOR OF CENTRAL EXCISE, PUNE DATE OF JUDGMENT19/02/1992 BENCH: SAHAI, R.M. (J) BENCH: SAHAI, R.M. (J) AHMADI, A.M. (J) RAMASWAMY, K. CITATION: 1992 SCR (1) 891 1993 SCC Supl. (1) 74 JT 1992 (2) 17 1992 SCALE (1)405 ACT: Central Excises and Salt Act, 1944/Central Excise Rules, 1994: Section 4/Rule 8-Entry 68-Cylinder liner-Manufactured and supplied after machining and honing-Whether identifiable as machine part-Whether exigible to duty. HEADNOTE: The appellant was manufacturing cylinder liner by casting molten iron in specific shape. The rough surface of the cylinders was removed and after machining and honing it was delivered to Railways. The respondent took the view that at the time the cylinders were supplied to Railways, they became identifiable as machine part attracting duty. According to the appellant, the cylinders continued to be iron casting and and only after Railways further treated the cylinders with honing and chrome plating, they became machine parts and excisable under the Central Excises & Salt Act, the duty being exigible under Entry 68. On appeal, the Tribunal gave a finding that by the time the goods were cleared from the factory, they ceased to be casting and assumed the character of fully machined cylinders, identifiable as such and exigible to duty under Entry 68. Being aggrieved against the Tribunal’s order, the assessee preferred the present appeal. The appellant contended that till the cylinder liner was finally processed by the Railways, it was incapable of being used as machine part, and as such no excisable commodity came into being at the time when the cylinder liners were supplied to Railways. It was also contended that the authorities were precluded from issuing notice and adjudicating whether the cylinder liner was a machine part, since in respect of an earlier period the classification list claiming it as iron 892 casting and thus exempt from duty, has been approved by the authorities. Dismissing the appeal, this Courts, HELD: 1. The Tribunal found that the contract in http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 2 of 5 pursuance of which the goods were manufactured was for supply of ‘fully machined cylinder liner’. The Railways would not have accepted the cylinder unless it tallied with the specification. There was no dispute before the authorities that first machining and honing was done in assessee’s factory. Also, from the letter issued by Railways, it is clear that what was supplied by appellant was fully machined cylinder liner. That was the contract as well. thus, the tribunal’s finding that the contract was for supply of, ‘fully machined cylinder liners’ stands supported by the letter of Railways also. The Tribunal, in the circumstances, was justified in recording the finding that by the time the goods cleared from factory they had ceased to be casting, and had assumed the character of fully machined cylinder liner or fully machined or proof machined cylinders which were identifiable as such. Since duty under Central Excises and Salt Act is leviable on manufacture of goods produced, the cylinder liner became exigible to duty under Entry 68. The duty of excise is on manufacture of a good and not on its use, as in the instant case, by the Railways. [894G-H; 895A, D, G-H;896A) Tata Iron & Steel Co. Ltd. v. Union of India, [1988] 3 SCR 1025; Union of India v. Delhi Cloth & General Mills Ltd., [1963] 1 SCR 587 referred to. 2. Once the tribunal found that cylinder liner ceased to be cast iron it is obvious that the department could not be precluded from levying duty on it subject to the law of limitation. Since show cause notice which resulted in these proceedings was for a period other than for which proceedings had been dropped, it cannot be said to be review proceedings. [896B] Plasmac Machine Mfg. Co. Pvt Ltd. v. Collector of Central Excise, AIR 1991 SC 999 relied on. JUDGMENT: CIVIL APPELLATE JURISDICTION : Civil Appeal No. 4457 of 1984. From the Order dated 17.8.1984 of the Customs Excise and Gold (Control) Appellate Tribunal, Delhi in Appeal No. ED (SB) 776/83- B) Order No. 623 - B/ 84. 893 R.F. Nariman, Sumant Bhardwaj, B.R. Agrawala and Sunil Goyal for the Appellants. A. Subba Rao, A.D.N. Rao, G. V. Rao and P. Parmeswaran for the Respondents. The Judgment of the Court was delivered by R. M. SAHAI, J. Two questions arise for consideration in this appeal directed against the order of the customs, Excise & Gold (Control) Appellante Tribunal Special Bench ‘B’. One, whether cylinder liner manufactured by the appellant out of iron casting identifiable as machine part was exigible to duty under tariff item no. 68 or it continued to be iron casting and thus exempt under Notification issued under sub-rule (1) of Rule 8 of Central Excise Rules. Second, whether the authorities were precluded from issuing notice and adjudicating if the cylinder liner was a machine part, even though for an earlier period the classification list claiming it as iron casting, thus exempt, had been approved. Cylinder liner was manufactured by the appellant by casting molten iron in specific shape. By itself it was of no use. This could be said to be first stage. Its rough surface was thereafter removed. And after machining and http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 3 of 5 honing it was delivered to the Railways. According to department it became identifiable as machine part. This was second stage. The Railways further treated it with honing and chrome plating before putting it to use. There is no dispute that on the first stage it is an iron casting which is exempt under item no. 25. Nor there is any dispute that at the third stage it is an excisable commodity. The only dispute is if at the second stage when it was supplied by the appellant to the Railways it could be subjected to duty. According to the appellant till its final processing by the Railways it did not become a machine part. It continued to be iron casting. It is claimed that merely because it was supplied to Railways or that it became identifiable as a machine part no duty was attracted as no excisable commodity came into being. Reliance was placed on Tata Iron & Steel Co. Ltd. v. Union of India, [1988] 3 SCR 1025. It was urged that this Court having held that rough machining before supplying after removing the excess layer of steel commonly referred to as excess skin did not convert the iron steel into wheels, tyre, and axle. According to learned counsel the principle of this case squarely applied to facts of the case. Reliance was 894 also placed on Union of India v. Delhi Cloth & General Mills Ltd., [1963] 1 SCR 587. The main plank of the argument was that till cylinder liner was finally processed by the Railways it was incapable of being used as a machine part. To appreciate the submission it is necessary to extract tariff item 25 which reads as under : \"25, IRON IN ANY CRUDE FORM - including pig iron, scrap iron, molten iron or iron cast in any other shape or size.\" Notification No. 74/62 issued on 24.4.1962 as amended by NOtification no. 119/64 dated 27.6.1964, under sub-rule (1) of Rule 8 of Central Excise Rules, 1944 is extracted below: \"Exemption to iron in any crude form produced from old iron or steel scrap.- In exercise of the powers conferred by sub-rule (1) of Rule 8 of the Central Excise Rules , 1944, the Central Government hereby exempts iron in any crude form including pig, iron, scrap, iron, molten iron or iron case in any other shape or size failing under Item no. 25 of the First Schedule to the Central Excises and Salt Act, 1944 (1 of 1944), and produced out of old iron or steel scrap or scrap obtained from duty-paid virgin metal, is with effect from 1st March, 1964, exempted from the payment of the excise duty leviable thereon.\" In the classification list exemption was sought on cylinder liner by describing it at serial no. 4 as under: \"4. Cylinder liners to Part No. 10123416 which is not identifiable part in that it is partially machined only and not ready for use.\" The description of the goods as, partially machined, does not appear to be correct. The tribunal found that contract in pursuance of which the goods were manufactured was for the supply of, ‘fully machined cylinder liner.’ And in absence of any material it was obvious that the Railways would not have accepted the cylinder unless it tallied with the specification. There was no dispute before the authorities that first machining and honing was done in assessee’s factory. According to appellant it was only akin to removal of rough layer as in Tata’s case whereas according to department http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 4 of 5 895 it was much more and it resulted in rendering it as machine part. The Collector observed,’ \"However, the specifications given by these clients state in particular that the first machining and honing is to be done at the assessee’s end. The process mainly covers grinding which is defined as ‘Reducing to size by removing material by contact with a rotating, abrasive wheel; plane or cylindrical surfaces may be very accurately finished with regard to size and shapes’ (as per Dictionary of Mech. Eng. Alfred Del Vecchio and Chambers’ dictionary of Sc. and Tech.) Similarly, the term honing is defined as, ‘a term applied to fine textured even grained indurated sedimentary rocks, which may be used for imparting a keen edge to cutting tools, replaceable by silicon carbide products’. (...as per Chambers’ dictionary of Sc. & Tech.).\" It is thus obvious that the processing undertaken in assessee’s factory to render the cylinder liner as fully machined resulted in changing the goods from crude cast iron in size and shape to an identifiable commodity. The duty of excise is on manufacture of a good and not on its use. Reliance was placed on a letter issued by the Controller of stores Indian Railways Diesel Locomotive Works, Varanasi stating therein : \"Thus, it would be completely out of question to use the cylinder liners fully machined and after first honing as supplied by the suppliers in the engine without further processing (chrome plating and honey combing) howsoever uniform and smooth the cylinder liners supplied by the manufacturers may be.\" In our opinion it does not help the appellant. In Tata Iron & Steel Co. (supra) it was admitted in the letter of Railway that what was supplied was rough machined or forged condition. But from the letter extracted above it is clear that what was supplied by appellant was fully machined cylinder liner. That was the contract as well. The tribunal’s finding that the contract was for supply of, ‘fully machined cylinder liners’ thus stands supported even by the letter of Railways. The tribunal in the circumstances, in our opinion, was justified in recording the finding that by the time the goods cleared from factory they had ceased to be casting, and had 896 assumed the character of fully machined cylinder liner or fully machined or proof machined cylinder which were identifiable as such. Since duty under Excise and Salt Act is leviable on manufacture of goods produced the cylinder liner became exigible to duty under Entry 68. Once the tribunal found that cylinder liner ceased to be cast iron it is obvious that the department could not be precluded from levying duty on it subject to the law of limitation. Since show cause notice which resulted in these proceedings was for a period other than for which proceedings had been dropped, it was not review as urged by the learned counsel for appellant. In Plasmac Machine Mfg. Co. Pvt. Ltd. v. Collector of Central Excise, AIR 1991 SC 999 it was held by court, of which one of us (R. M. Sahai, J.) was a member, that if an item was found dutiable then the department could not be prevented from levying duty on it because it had earlier approved classification as there is no estoppel against statute. http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 5 of 5 In the result this appeal fails and is dismissed with costs. G.N. Appeal dismissed. 897 "